Project by Kristen Alexandra from Boston, Mass.Kristen creates gorgeous beaded metal hairsticks.
Materials:
brass
Rudraksha seed beads
file
drill
wire
soldering iron and solder
grinder
cleaner
wire crimps
sealant
Steps:1. Start with brass rod the proper thickness for the stick. Cut it to the needed length.
2. File one end flat.
3. Drill the center of the flat end about 1/2-inch deep (figure A).
4. Fit a wire into the hole and solder it in place.
5. Soak the stick in cleaner.
6. Grind the other end of the stick to a soft point.
7. Apply a finish to the stick.
8. String beads through the wire (figure B) and crimp the end off to keep the beads from coming off (figure C).
Website: www.kristenalexandra.com
![PHOTO](javascript:popup("http://img.diynetwork.com/HGTV/2004/10/22/HCC2c_120_Alexandra_e.jpg",350,450))
![PHOTO](javascript:popup("http://img.diynetwork.com/HGTV/2004/10/22/HCC2c_120_Alexandra_hairsticks_e.jpg",350,450))
![PHOTO](javascript:popup("http://img.diynetwork.com/HGTV/2004/10/22/HCC2c_120_hairsticks_drillcenter_e.jpg",350,450))
![PHOTO](javascript:popup("http://img.diynetwork.com/HGTV/2004/10/22/HCC2c_120_hairsticks_addbeads_e.jpg",350,450))
![PHOTO](javascript:popup("http://img.diynetwork.com/HGTV/2004/10/22/HCC2c_120_hairsticks_crimpwire_e.jpg",350,450))
