Materials: very fine sand paper
clear Polyshrink
Stampassions apron template - TP 1007
Stampassions rubber stamps
- dragonfly - C2308
- picket fence - C2304
- garden gate - C2306
- Kindhearts phrase - D2311
heat gun
colored chalk
Xyron adhesive machine
Pulpassions purple plaid paper
scissors
3-inch length of purple plaid ribbon
hot glue
Sakura Crystal Lacquer
magnet Steps: 1. Sand both sides of 1/2 sheet clear Polyshrink material with very fine sandpaper. Wipe clean with paper towel to remove 'dust.' 2. Trace Stampassions apron template onto sanded Polyshrink (figure A). Trace only 1/2 of the template. If making more than one magnet, sand a whole sheet of Polyshrink, trace the entire template and cut in half on score lines to make two magnets. 3. Rubber-stamp dragonfly, phrase, picket fence and garden gate (all from Stampassions ) designs onto the Polyshrink apron (figure B). Color with chalks (figure C), cut out then shrink using a heat tool (figure D). 4. Run the apron through a Xyron machine. 5. Adhere to Pulpassions purple plaid paper to the apron. Trim around the apron and press paper firmly to seal the adhesive. 6. Cut a three-inch length of purple plaid ribbon and adhere it to back of apron with hot glue. 7. Cover the front of apron with Crystal Lacquer and let dry. 8. Glue a magnet to back of apron.
RESOURCES :
Sakura 3-D Crystal Lacquer - three-dimensional medium
Sakura Hobby Craft
Website: www.sakuracraft.com
Pulpassions paper, rubber stamps and apron template
Stampassions Inc.
Stampassions is no longer in business.
Xyron adhesive
Xyron Inc.
Company Contact: Amy Romano
Website: www.xyron.com
| 
)
)
)
)
)
