DIY Network

How to Install Closet Shelving

Looking for a storage solution? Use these step-by-step instructions to install closet shelving in no time.

More in Remodeling

install closet shelving for storage solution
  • Time

    Weekend

  • Price Range

    $250 - $500

  • Difficulty

    Moderate

Highlights:

Step 1: Make the Side Pieces

Rip 4'x 8' sheets of plywood into 20" wide pieces. This will yield two pieces that wide per sheet. You will need four pieces total.

Using a router, rout out two 3/4" grooves down the length of the side pieces of wood. These will house the standards that will hold the shelves in place. Screw the standards in place with the supplied wood screws.

rout out grooves down length of side pieces

Step 2: Cut the Header and Footer Boards

The header and footer boards need to be cut. They'll be 20" wide and 33" long. Use the circular saw to make these cuts.

With the wood cut to size, it’s time to prime and paint the wood prior to construction.

Step 3: Assemble the Wood

Pre-drill where the wood will meet and then line the joints with wood glue. Using 2" wood screws in the pre-drilled holes, assemble the finished wood in all four corners.

assemble the wood

Step 4: Cut and Secure the Shelves

Stand up the unit and measure between the sides to know how long the shelves will need to be. Cut the shelves from the same 3/4" plywood.

Once both shelving units are constructed, place them in the closet and attach them to the wall using angle brackets and 3" wood screws, being sure to attach them to the studs in the wall.

cut and secure shelves

Was this project helpful?

Don't forget: Read comments and leave your own

Advertisement

Projects

COMMENT ON THIS PROJECT

    

Sign in

All fields are required.

E-mail Address:

Password:

Remember me on this computer

Signing in

Please enter your email address and we will send your password

E-mail Address

Your password has been sent and should arrive in your mailbox very soon.

Not a member?

Sign up with DIY Network to share tips with other do-it-yourselfers and comment and ask questions on projects.

It's free and easy.