More in Remodeling
Sketch out a plan. The bookcase in this project slips into a knee wall in the renovated attic for extra storage. Sketch out the dimensions for the bookcase to determine the dimensions for the individual pieces.
Use a table saw to cut the bookcase pieces from birch plywood.
Use wood glue and a nail gun to assemble the bookcase. Make sure all corners are squared off and the shelves are level before driving nails.
Safety Alert: Always be careful when working with a nail gun. These powerful tools can drive a nail through wood – or a hand or foot – instantly.
Sand, prime and paint the bookcase as desired. Allow the paint to dry completely before installing.
Slide the bookcase into the opening in the wall. Check the bookcase for level, using shims as needed to level the piece. Use a straight edge to make sure the frame is flush with the wall and fits close to the wall studs. Drive nails through the sides of the bookcase into the wall studs; if using shims between the bookcase and studs, make sure to drive nails through the shims. Break off any shims that stick out past the front of the bookcase.
All fields are required.
Remember me on this computer
Please enter your email address and we will send your password
Your password has been sent and should arrive in your mailbox very soon.
Sign up with DIY Network to share tips with other do-it-yourselfers and comment and ask questions on projects.
It's free and easy.