LIVING Index
Beauty
Budget Decorating
Children's Activities
Computers
Decorative Accessories
Doors
Entertaining
Faux Finishing
Finance
Fireplaces
Floors & Ceilings
Flowers & Plants
Food & Cooking
Furniture
Handles, Knobs & Hinges
Health
Household Tips
Insurance
Lamps & Lighting
Linens & Fabrics
Non-Traditional Housing
Outdoor
Seasonal Decorative
Other

Painting & Staining
Pets
Recycling
Rooms & Furnishings
Safety
Stamping & Stenciling
Themed Decor
Wall Coverings
Wall Decor
Window Treatments

BEST OF LIVING
Mold Quiz
Home Safety
Room Planner
Pet Care Guide
Weekend Projects
DIY to the Rescue
Sparkling Solutions
Organize Your Home
Ultimate Media Room
Picture Perfect Parties
Queen of Clean

SPONSOR LINKS

  • Liner Notes
  • Liner Notes
    From "Grounds for Improvement"
    episode DGFI-105


    With the concrete foundation finished, the team hauls away wheelbarrow after wheelbarrow of sand from the yard and removes the plywood panels. The next step will be to add a 45-mill rubber pond liner to waterproof the fountain area.

    advertisement


    With the liner in the hole, Dean gently removes the top layer of sod and smoothes the edges of the liner over the surface. Then he adds stone architectural pavers to cover the liner and hold it in place, letting the stones extend 6" over the edge of the hole (figure A). He and Craig cut away the excess liner and flatten the stones with a rubber mallet until they're level (figure B).
    Photo

    Figure A

    Photo

    Figure B


    While Dean hammers concrete blocks in place to form the base of the pedestal, Craig and Alicia drill 3/4" holes in the center of a paving stone and the metal planter. The drilled stone is set atop the blocks and surmounted with the planter, and copper tubing is run up through the structure (figure C). Then a rubber hose is run under the pedestal and secured to the copper tube, and the other end of the hose is attached to the water pump (figure D). The pump will rest on the floor of the fountain, and the power will come from an outlet near the house, with the cable buried in the yard.
    Photo

    Figure C

    Photo

    Figure D


    Finally, a bead of expanding foam sealant is run between the pavers and the liner to make the fountain watertight (figure E). Then a path of pavers, set 24" apart, is built from the house to the fountain (figure F).
    Photo

    Figure E

    Photo

    Figure F



    RESOURCES :

    Black and Decker tools
    Website: www.blackanddecker.com
    Black & Decker, Inc. (Corporate)
    Website: www.bdk.com/main_bd.htm

    Sealants
    OSI Sealants, Inc.
    Website: www.osisealants.com

    Porter-Cable Tools
    Porter-Cable Corporation
    Website: www.deltaportercable.com

    Delta Woodworking Tools
    Deltak Power Tools
    Website: www.deltamachinery.com

    Irwin Industrial Tool Company
    Website: www.irwin.com

    Ames True Temper Tools
    Ames-True Temper
    Website: www.ames-truetemper.com

    Bamboo fencing
    Smith & Hawken
    Website: www.smithandhawken.com

    Water features
    Aquascape Designs, Inc. (wholesale)
    Website: www.aquascapedesigns.com

    Paving stones
    Pavestone
    Website: www.pavestone.com

    Equipment rental
    Sunbelt Rentals
    Website: www.sunbeltrentals.com

  • ALSO IN THIS EPISODE: