DIY Network

Candleholder Learn how to make wooden candleholders. From "Home Made Easy" episode DHME-162

Leslie Neblett, Decorating Made Easy expert, joins host Stephanie Lydecker and demonstrates how to make votive style candleholders using Douglas fir posts and a drill bit.

advertisement

	Guest Leslie Neblett, right here with host Stephanie Lydecker, creates unique candleholders using Douglas fir.
	Figure A
	Figure B

Candleholder

Materials:

4" x 4" piece of Douglas fir, cut to size
tea lights, with metal casing
power drill
1-1/2" flat wood drill bit
pencil
masking tape
sanding block

1. Cut the Douglas fir posts to the desired length (or have your local hardware store cut it to size for you). You can make several candle holders from one post.

2. Using a 1-1/2" flat wood drill bit (figure A), bore out the amount of holes you need making sure they are deep enough to hold each tea light.

   Note: You can also drill for taper candles instead of tea light. Taper candles would need 7/8" in diameter. Place the male part of a grommet in the bottom of the hole to help protect the wood from fire.

   Note: Secure the post before you begin drilling as you will need to apply some pressure and safety is always a concern.

3. If you want a more finished look, you can sand the edges — or keep them rough for a more rustic look.

4. Apply felt self-stick pads to keep the wood from scratching finished surfaces. You want to stain the candle holders to match your décor. Follow the manufacturer's instructions for the stain you use.

5. You can lay out the candle holders any way you choose (figure B) on the tables.

Note: Make sure to use tea lights with metal holders. This will make the removal that much easier. As a safety note, never leave burning candles unattended.

GUESTS :

Leslie Neblett
E-mail: leslieneblettarchitecture@gmail.com