DIY Network

Ironing 101 Ironing 101 From "Talking Dirty With the Queen of Clean" episode DQOC-124

Ironing is a job that many people don't care to do. But after today, it should be less of a chore. Different fabrics require different ironing techniques and different temperature settings.

advertisement

• Cotton fabrics require a high heat setting. If the fabric is heavily wrinkled, iron it first on the back, then on the front.

• Rayon can be ironed on the wrong or the right side, but for best results, iron on the right side. Iron using low heat: high heat can burn the fabric.

• For heavily wrinkled clothes, dampen a towel, lay the wrinkled fabric on the towel, and iron. The steam from both sides of the fabric will remove the wrinkles faster. This technique works well on cotton shirts and denim.

• Remove clothes from the dryer and iron while they are still slightly damp to eliminate excess wrinkling.
  

  	Figure A
  	Figure B
  	Figure C
  	Figure D

• Iron delicate fabrics like polyester on the wrong side (figure A). Then if the iron should scorch or leave shiny spots on the fabric, it won't show through to the front.

• Use pressing cloths for delicate fabrics or fabrics with ornamentation. Lightweight towels or muslin cloth are perfect to use as pressing cloths.

• Iron seams on the wrong side first, and when ironing a shirt, iron seams first to flatten them down nicely.

• When ironing hems, stop ironing just short of the hem to avoid creating a line over it (figure B).

• Collars are difficult to iron. They should be ironed first on the wrong side, starting at the collar points. Work the iron in to the center point, leading with the point of the iron. Then flip over to the right side of the fabric and repeat the process. Don't press down; instead, use the heat of the iron to glide over the fabric (figure C).

• Line up sleeves and press the inside of the sleeve cuff first, letting the heat of the iron do the work. Stop the iron short of seam edges to prevent unwanted creases (figure D).

• For large items such as tablecloths, don't use the small end of the ironing board. Instead, lay the fabric (folded, if needed) across the big end of the board and press. Keep the fabric moving forward until it is ironed, then flip it over and press the other side.