| Embossed Wallpaper Panel |
From "Ask DIY"
episode ADI-304 |
|
|
|
advertisement
|
Q: I have a large wall with scattered pictures and mirrors on it. How can I make the smaller objects more of a focal point on such a large wall? A: (from Nancy Golden, Ask DIY Decorating Expert) This is a common problem for many people: They've collected a variety of objects over the years and don't know how to display them. With an embossed panel, you can define and hightlight these objects so they can be grouped and arranged with beautiful results (figure A). Materials:
Sheet(s) of embossed paper in the desired size (these are available in most craft and art supply stores)
Spray adhesive
Trim molding (enough to frame the panel)
Bullet blocks (corner pieces for trim molding)
Spray paint (optional, for painting molding)
Gilding cream (optional, for enhancing molding)
Glue gun and glue sticks
Level
Ruler
Pencil
Decorative element (photo, plate, architectural element, etc. - The first thing you'll need to do is cut your paper to the exact size you want your panel. Once you have the desired size, you're ready to attach the panel to the wall. Using a pencil, mark the area on the wall where the panel will be positioned, using a level and ruler to ensure that the panel is straight.
- Next you'll need to apply a light coat of spray adhesive to both the area of the wall where the panel will be placed and to the panel itself (figure B).
Note: As you work, avoid touching the side of the paper you've sprayed and be careful to keep the adhesive inside the pre-marked lines as you spray it on the wall. - Once you've smoothed the panel into place, you're ready to add the trim (figure D). (Be sure to choose a size that's proportionate to the size of the panel you're creating.) You'll need to measure and cut the pieces to the needed lengths before painting them; some home improvement centers will do this for you. Spray paint the pieces in the desired color and allow them to dry completely.
Tip: To give your trim an aged / antique look, add a bit of gilding cream to the surface after the spray paint has dried. Simply dip a dry brush into the jar of gilding cream (figure E), blot most of the product onto a dry cloth, then gently brush the remaining cream onto the surface of the frame (figure F). If you accidentally apply too much, don't panic! Simply use the cloth to remove any excess to achieve the desired look. - To attach your trim to the wall, use a glue gun to apply hot glue to the backs of each piece (figure G). As you press the pieces in place on the wall, make sure the pieces of trim overlap the edges of the embossed paper. Once each side of trim is straight and secure, use hot glue to attach the bullet blocks (corner pieces) in the same fashion(figure H).
Now you're ready to center your decorative element on the panel, hang and enjoy!
RESOURCES :
Gail Brown's All-New Instant Interiors: Decorate With Fabric Fast
Model: 0932086330
Author: Gail Brown and Bobbie Keeney
January 1993
Open Chain Publishing
Home Book of Picture Framing
Model: 0811727939
Author: Kenn Oberrecht
(May, 1998)
Stackpole Books
The Encyclopedia of Picture Framing Techniques
Model: 0762402571
Author: Robert Cunning
(March, 1998)
| 
)
)
)
)
)
)
)
)
