DIY Network

Changing Table From "Wasted Spaces" episode DWSP-108

(Continued from page 2)

Building Accessory Panels

Dry Erase Panel

1. Measure the bottom of the folded up box. Cut masonite dry-erase panel to size using a circular saw.

2. Attach vinyl trim to the edge of the board with super glue.

3. Flip the panel over and use the super glue to stick magnets to the back.

Tip: Use strong magnets and space them evenly to ensure the panel will stick to the sheet metal.

advertisement

The sheet metal in the base of the fold down box, allows for magnetic accessory panels to adhere to it. Any number of panels can be made and they all attach the same way.

Cork Board Panel

1. Cut masonite to size and use it as a template to trim the cork panels.

2. With a utility knife and straight edge, cut the cork.

3. Spray contact adhesive on the back of the cork and the masonite panel.

4. When the glue is tacky to the touch, set the panels in place.

5. Flip the panel over and use the super glue to stick magnets to the back.

1 | 2 | 3

RESOURCES :

Klein Tools
Website: www.kleintools.com

Delta Tools
Website: www.deltaportercable.com

Porter-Cable Tools
Website: www.deltaportercable.com

Benjamin Moore Paint
Website: www.benjaminmoore.com