DIY Network

Toilet Installation How to install a toilet From "Bathroom Renovations" episode DBTR-409

Host Amy Matthews and homeowner Molly install the contemporary toilet and add a shutoff valve to the water supply line.

advertisement

	Figure A
	Figure B
	Figure C
	Figure D
	Figure E

Materials:

hammer
pliers
closet bolts
wax ring
tubing cutter
escutcheon
shutoff valve
adjustable wrenches
toilet supply line
hacksaw
washer/nuts
finish caps

Toilet Installation

1. Remove the center of the toilet flange with a hammer and pliers (figure A).

2. Place two closet bolts to hold the toilet in place. Add washers on top of the bolts, then place the wax ring on the toilet flange.

3. Use a tubing cutter to cut the copper water supply line to the proper height (figure B).

4. Cover the supply line with an escutcheon and attach the shutoff valve. Use two wrenches to tighten the valve (figure C).

5. Attach one end of the water supply line to the toilet (figure D). Set toilet in place.

6. Cut closet bolts to the proper height and cover with finish caps (figure E).

RESOURCES :

Bathtub
Forma
Model #: RE 527
Website: www.jasoninternational.com

Water Closet
Model #: 6006.130.01

Martinique Countertop Lavatories
Model #: 1025.000.01

Barrymore Tilting Mirrors
Model #: 2077.250.96
Website: www.stthomascreations.com

Paper Holder
Sonora Collection
Model #: D442231

Robe Hooks
Sonora Collection
Model #: D442171

Towel Bar 24"
Sonora Collection
Model #: D442421

Towel Bar 18"
Sonora Collection
Model #: D442421
Website: www.danze.com