DIY Network

Attic Access and Flooring From "Wasted Spaces" episode DWSP-102

(Continued from page 2)

Security Barrier

1. Screw 2x3s around the boundaries of the plywood floor. These will create the base of the barrier.

2. Create the small barrier wall by nailing squares or rectangles of leftover plywood into the 2x3 base at the boundary of the flooring.

3. For extra strength, and to reinforce the seams, nail in small plywood squares behind the wall where different pieces of plywood meet.

advertisement

	Chases are simple structures that encase something in order to enclose and protect it.
	This once unused attic is now utilized to the fullest. There are no more Wasted Spaces!

Covering Ductwork

1. To protect the further exposed ductwork, create chases.

2. Measure the exposed duct work first and then cut corresponding pieces of plywood to create chases. It will be similar to creating little three-sided boxes.

3. Cut three sides of strong plywood for each exposed duct– the same plywood used as floor will be fine.

4. Fasten the sides together tightly with screws.

5. For portability, you have the option of not affixing the chase to the floor.

6. If you are concerned about the chases shifting, you have the option of securing some of the chases to one another with 2x4s.

Tip:

• In addition to protecting the ductwork, the chases can be used for a seating area, or for storage. The chases also help create a uniform and cohesive look to your attic by covering up the ugly duct work.

1 | 2 | 3

RESOURCES :

Huber Engineered Woods, LLC
Website: www.huberwood.com

Klein Tools
Website: www.kleintools.com

Delta Tools
Website: www.deltaportercable.com

Porter-Cable Tools
Website: www.deltaportercable.com

Louisville Ladder Inc.
Website: www.louisvilleladder.com

Rubbermaid
Website: www.rubbermaid.com