DIY Network

Glass Block Windows How to install glass block windows From "Kitchen Renovations" episode DKTN-506

The homeowners want more light in the kitchen, so they decide to add a row of glass block windows.

advertisement

	Figure A
	Figure B
	Figure C

Materials:

tape measure
pencil
chalk line
safety glasses
dust mask
circular saw
hammer
reciprocating saw
2x4s
framing nailer
hammer tacker
silicone
caulk gun
torpedo level
screws
screw gun

Glass Block Windows Installation

1. Determine desired height for windows and snap a chalk line (figure A).

2. Cut along chalk lines using a circular saw with a carbide-tipped blade (figure B).

3. Remove drywall, plaster and lath to reveal the studs (figure C).

4. If you find old knob and tube wiring in the wall, test it to be sure it is not in use (figure D). Clip the wires and cap them with wire nuts.

5. Use a reciprocating saw to cut through the siding and create the opening (figure E).

Figure D

Figure E

6. Add blocks of wood to the top, bottom and sides to act as nailing blocks (figure F).

7. Staple tar paper on the exterior of the house around the window opening (figure G).

Figure F

Figure G

8. Run a bead of silicone to the flange of the glass block window (figure H) and set in place (figure I).

9. Check for level and secure the window with screws (figure J).

Figure H

Figure I

Figure J

RESOURCES :

Glass Block Windows
Website: www.glassblockinnovations.com

GUESTS :

Steve Ptaszek
Sawhill Custon Kitchen & Design
Website: www.sawhillkitchens.com

Alex DeCamp
Cutting Edge Tile Inc.
Phone: 952-941-8533