Materials: regular table
wood screws
Masonite sheet
rolling wheels (4)
tape measure
Rolling Production Table
1. Using a regular wood table, attach rolling wheels to the legs (figure A).
2. Once the marks are made for the position of the wheels, use 1-1/4 inch screws to secure to the legs.
3. These wheels also feature a locking mechanism.
4. Since this table is going to be a work table, the idea is to add Masonite to the top.
5. Once the Masonite is attached to the top, attach plastic corner molding to all four sides with wood screws (figure B).
![PHOTO](javascript:popup("http://img.diynetwork.com/DIY/2006/05/12/dhtr207_4fa_e.jpg",350,450))
![PHOTO](javascript:popup("http://img.diynetwork.com/DIY/2006/05/12/dhtr207_4fb_e.jpg",350,450))
