(Continued from page )
Gas Stove Installation1. Place the stove directly onto the hearth so that it is centered (figure K). 2. To exhaust the stove properly, follow the manufacturer's instructions. The manufacturer recommends that the vent pipe be angled 1/4 inch for every foot. 3. Mark the angle and cut the drywall with a jab saw. Frame out the hole and make the matching cut on the exterior for the flue. 4. Install a vent collar (figure L)--also called a wall thimble--over the hole, and a fire stop for the vent pipe.
5. Attach a cover plate over the thimble as cosmetic trim (figure M).6. On the outside, install a vent cap to carry the exhaust out and keep the heat in (figure N). 7. Finally, attach the stove to the vent and turn it on. Again, be certain to follow the instructions.
RESOURCES :
Gas Stove
Brand Name: Quadra-Fire
Style: Topaz
Color: Linden Green
Website: www.quadrafire.com
Laminate Flooring
Brand Name: Dream Home
Style: Nirvana
Color: Quebec Cherry
Website: www.lumberliquidators.com
Garage Storage Units
Brand Name: Easy Track
Color: Natural Maple
Website: www.easytrack.com
Desk Sets and Office Chairs
Brand Name: Ashley Furniture
Style: Charleton
Color: Mahogany finish
Sofa and Chair
Brand Name: Ashley Furniture
Style: Durapella
Color: Red
Website: www.ashleyfurniture.com
GUESTS :
Kevin Beck
Contractor
Beck Custom Builders
Website: www.beckcustombuilders.com
| 
)
)
)
)
