Materials:Chalk line
Miter box or miter saw
Tape measure
Finish nailer
Finish nails
Framing nailer
Hammer
Nail punch
Lumber
Masonry brackets
Fasteners
Building a Deck
1. Measure and lay out the location for the post anchors.
2. Install post anchors using masonry bit and masonry fasteners (figure A).
3. Remove siding from house for ledger.
4. Attach double 2x10 ledger to the house using lag screws and treated lumber.
5. Set posts in place and fasten with lag bolts (figure B).
6. Build exterior rim of the frame.
7. Install treated 2x10 joists using joist hangers.
8. Attach 2x12 stair stringers.
9. Attach 2x10 cedar stair treads.
10. Install 1-1/4x6 cedar floor boards.
11. Install cedar railing and balusters.