HOME IMPROVEMENT Index
Appliances
Basement
Bathrooms
Bedrooms
Cleaning
Contractors
Doors
Driveways & Paths
Duct Tape
Electrical Systems
Family Room
Fences & Gates
Fireplace
Floor Coverings
Furniture
Handles, Knobs & Hinges
Help on the Homefront
Home Energy Efficiency
Home Office
Homeowner in Process
House Exterior
Indoor Pests
Kitchens
Lighting
Outdoor Equipment
Outdoor Structures
Trellises & Arbors
Decks
Log Cabins
Maintenance
Other

Painting
Plumbing
Safety
Sports-Related Additions
Staining
Stairs
Storage
Tools
Utility Room
Walls & Ceilings
Windows

BEST OF
HOME IMPROVEMENT
Flooring
Decks
Mold Quiz
Home Safety
Tiling Techniques
Lighting Solutions
Weekend Projects
DIY to the Rescue
Home Renovations
Bathroom Makeover
Kitchen Renovations
Ultimate Media Room
Be Your Own Contractor

SPONSOR LINKS

  • Extreme Deck #1
  • From "Build a Deck"
    episode BDK-105
    advertisement

    Click here to view a larger image.

    In this final episode of DIY's Build a Deck, the time is devoted to looking at some extreme -- and innovative -- decks. This first one is a work of "overhanging" art.

    Click here to view a larger image.

    If you suffer from vertigo, this is not the deck for you!

    Click here to view a larger image.

    Figure A

    Click here to view a larger image.

    Figure B


    In the final episode of DIY's Build a Deck workshop, we take a tour of five unique, innovative and extreme decks with host Jeff Wilson and guest Hamilton Brock, of Graham Vannoy Construction Company in Rising Fawn, Georgia.

    Extreme Deck #1

    • This extremely unusual deck's main feature is the fact that is overhangs a bluff. "Because of the location where we are, safety was our main concern," Brock says. "We had to build a tremendous amount of scaffolding just to get up [there] and also used a lot of safety harnesses for the employees who would be hanging out -- literally -- over this bluff to build this, so it was a pretty impressive project."

    • Due to the span of the deck, the support beams had to be made of tubular steel. They were as tall as 35 feet. Steel I-beams run along the edge of the deck for added support.

    • Here are a couple of the deck specs:

      1. The deck is made of Brazilian Epae hardwood (figure A), commonly known as "Ironwood," which was imported. In order to put this particular "dense" decking down, you have to pre-drill every hole for the screws because you can't drive a nail through it. This durable product won't warp and should last a lifetime. Even without a finish (this particular deck has one) this wood is beautiful and strong. It will weather a silver-gray without a finish, however. Note that a nice finish will also bring out the highlights of the wood. Compared to treated pine, this decking is five times more expensive!

      2. Stairs and Railing (figure B) -- Made out of stainless steel, the railing is totally unique. The steel was chosen because iron would rust over time. Due to a glare issue, the railing was, however, sandblasted to give it a matte finish. No paint was used. All the railing was fabricated off-site, brought up in sections and spot-welded at each corner to create a continuous look.


    RESOURCES :

    The Home Depot Information

    To locate the Home Depot store nearest you, click here.

    The Home Depot U.S.A. Inc.
    Website: www.homedepot.com

    The Complete Guide to Building Decks (Black & Decker Home Improvement Library)
    ISBN: 0865734275
    Author: Editors of Creative Publishing International
    Order this title from Amazon.com.
    Creative Publishing International, Inc.
    Website: www.creativepub.com

    Building a Deck: Expert Advice From Start to Finish (Taunton's Build Like a Pro)
    ISBN: 1561584797
    Author: Scott Schuttner
    Order this title from Amazon.com.
    The Taunton Press Inc.
    Website: www.taunton.com


    GUESTS :
    Hamilton Brock
    975 Highway 157
    Lookout Mountain, GA 30750
    Phone: 706-398-0616
    Graham Vannoy Builders

  • ALSO IN THIS EPISODE: