DIY Network

Kitchen Island: Adding Corbels and Glazing From "Weekend Handyman" episode WKH-406

Corbels are added as a decorative shelf for the countertop to rest on. By glazing the island, Paul brings out the texture of the molding.

advertisement

	Before, this '80s kitchen had an island...sort of.
	Now, the kitchen has a brand new, customized island.
	Figure A
	Figure B
	Figure C
	Figure D

Time: 18 hours over two days.
Difficulty Rating: This project rates a 3 out of 5 on the Weekend Handyman difficulty scale.

Materials:

Safety glasses
Stock cabinets
Variety of molding
Cabinet feet
Corbels
Countertop
Square
Combination square
Trim saw
Reciprocating saw
Finish nailer
Chop saw
Glue
Nails
Clamps
Shims
Cotton rag
Glaze

Adding Corbels and Glazing

1. Prime the cabinets, molding and toe kick.

2. If you choose to do so, upgrade the stock shelves to a more durable laminated particle board. When cutting through any laminated material, cut slowly to prevent the board from chipping, splintering or tearing.

3. Determine the horizontal center of the drawer, measure and mark. With a combination square, find the vertical center of the drawer, make another mark and pre-drill holes in the cabinets for the hardware. Before drilling a hole through a drawer, clamp a piece of wood behind. This prevents the back of the drawer from blowing out when the drill bit goes through (figure A).

4. Corbels need to be added to support the countertop of the island. Using two brackets to support the countertop, space each one an inch and a half from the edge, this will create even spacing for the corbel (figure B).

5. The screws holding the corbels need to be accurate, about an inch down from the top of the corbel. Transfer the mark to the island and drill a hole for the screw (figure C).

6. Attach the corbel onto the bracket, making sure that it is perfectly lined up with the top of the cabinets (figure D).

7. Glazing the island will add color and bring out the texture of the island. Begin painting with the gel (figure E). Then, with a cotton rag begin wiping the gel with the grain of the wood until you have the desired texture (figure F). If you wipe too much off, simply apply more glaze and wipe again until you achieve the desired look.

Figure E

Figure F

RESOURCES :

Cabinet Hardware and Accessories
Reeded Half Round Oak Split Dowel (1-1/2" X 36"), Model #: 49852
Split Dowel End Blocks, Model #: 49899
Quarter and Corner Round Cut Rope Molding 3/4"Model #: 57560
French Country Bun Feet, Model #: 43615
Gingerbread Brackets, Model #: 98906
Petite Acanthus Corbel, Model #: 35575
Shelf Supports, Model #: 33860, Color: Nickel
Shelf jig and 1/4" bit set, Model #: 32991
Stainless Steel Knobs 1-1/4", Model #: 23867
Drawer Pull Jig It Template, Model #: 35172
Clamp It Assembly Square, Model #: 29190

Manufacturer: Rockler Woodworking and Hardware
4365 Willow Dr.
Medina, MN 55340
Telephone: 1-800-279-4441
Website: www.rockler.com

Stock Cabinets
Wall, Model #: W2130Q10
Base, Model #: B12Q10
Base, Model #: WB18Q10
Base, Model #: B24Q10
Universal Filler, Model #: UF3Q10
Base End Panel, Model #: BEPQ10
Toe Kick, Model #: TK96Q10
Door 22w X 21 1/2h, Model #: W2130Q10SFPD22215
Door Drawer Front 5 3/4h X 22w, Model #: SFD57522

Brand Name: Quality One
Manufacturer: Quality One Woodwork, LLC
3005 Millard Ave.
Hasting, MN 55033
Telephone: 1-800-307-2140
Website: www.qualityonewoodwork.com

Bar Stools
Brand Name: Holland Bar Stool
Model #: Catalina
Type: Stainless

Manufacturer: Holland Bar Stool
12839 Corporate Circle Dr.
Holland, MI 49424
Telephone: 1-800-423-1903
Website: www.hollandbarstool.com

Custom Stainless Steel Island Countertop
Color: Antique Matte Finish

Manufacturer: SpecialtyStainless.com
83 Doat St.
Buffalo, NY 14211
Telephone: 1-800-836-8015
Website: www.specialtystainless.com

GUESTS :

Lili Jackson
Rockler Woodworking and Hardware
4365 Willow Dr.
Medina, MN 55340
Telephone: 1-763-478-8214