HOME BUILDING Index
Custom Homes
Log Cabins
Vacation Homes
Other

Electrical Systems & Wiring
Garages, Basements & Attics
Heating & Cooling
Home Exterior
Home Interior
Inspections & Codes
Insulation and Energy Efficiency
Plumbing
Rooms
Sewerage & Septic Systems
Site Preparation
Other

BEST OF HOME BUILDING
Best Built Zone
Home IQ
Heck of a Deck
Weekend Projects
Home Renovations
Be Your Own Contractor

SPONSOR LINKS

  • Blog Cabin: Windows, Window Seats and More
  • DIY's Karl Champley drops by the Blog Cabin site to offer an assist installing windows and some ideas on how not to waste space.
    From "Blog Cabin"
    episode DBLG-104


    PHOTO

    In this phase of DIY's Blog Cabin, windows are the focus. DIY online voters had a choice between double hung and casement windows. The double-hung windows won by a landslide.

    The basic steps for installing a window, as seen in this installment of Blog Cabin are summarized below.

    advertisement


    To help with the installation, Karl Champley, host of DIY’s Wasted Spaces stops by to lend a hand. He also helps turns two of our cabin’s wasted spaces into useful places.
    Photo

    Karl Champley,
    host of DIY's Wasted Spaces

    Photo

    Amy Devers


    PHOTO

    Paula and Larry McLain's stained-glass studio
    PHOTO

    A sample of the McLain's craftsmanship
    PHOTO
    First, Karl and Amy design a window seat with storage space for one of the upstairs bedrooms. And as the final project, Karl has an idea for turning a very plain basement space into useful storage, and maybe even a wine cellar of sorts.

    Along the way, Blog Cabin host Amy Devers takes a side-trip to the working studio of some local artisans who specialize in stained glass.

    Tools:

    power drill
    circular saw
    chain saw
    measuring tape
    finishing nailer
    flush-cut saw
    level

    Materials:

    double hung windows
    stained glass
    2x4s
    piano hinges
    wood glue
    plywood
    tongue-and-groove finish
    (optional: decorative bark finish)

    PHOTO

    Ben Bradshaw, of Peachtree Doors and Windows, discusses U-value of glass.
    DIY Pro Tip: U-Values of Glass

    The U-value in windows and glass doors measures the transfer of heat and cold through the glass. The lower the U-value, the higher the protection.

    Windows with a low U-rating also block out a large percentage of the ultraviolet rays (UV-A and UV-B) in sunlight. UV rays from sunlight are the non-visible portion of the light spectrum but can contribute to color-fading of hardwood floors, curtains, rugs, prints and artwork, etc.

    Photo

    The window opening, before the installation. (Due to a measurement miscalculation, the opening had to be enlarged before the window was installed.)

    Photo

    Amy helps remove the new double-hung window from its packaging.




    Page  1 | 2 | 3 | 4  


  • RELATED PROJECTS:

  • ALSO IN THIS EPISODE: