|
|
| Whirlpool Install: Whirlpool Maintenance |
| Whirlpool Install: Whirlpool Maintenance |
From "Ed the Plumber"
episode DETP-209 |
|
|
After a few uses, your whirlpool will need a good cleaning to remove any soap or other debris.
- Fill up the whirlpool with water (above the jets).
- Add 20 ounces of bleach along with two tablespoons of dishwasher detergent to the water.
- Turn the pump on to circulate the cleaner through the whirlpool system for about 10 minutes.
|
|
|
|
