HOME IMPROVEMENT Index
Appliances
Basement
Bathrooms
Bedrooms
Cleaning
Contractors
Doors
Driveways & Paths
Duct Tape
Electrical Systems
Family Room
Fences & Gates
Fireplace
Floor Coverings
Furniture
Handles, Knobs & Hinges
Help on the Homefront
Home Energy Efficiency
Home Office
Homeowner in Process
House Exterior
Indoor Pests
Kitchens
Lighting
Outdoor Equipment
Outdoor Structures
Painting
Equipment
Exterior
Interior
Paint & Primer
Staining
Stripping
Tips

Plumbing
Safety
Sports-Related Additions
Staining
Stairs
Storage
Tools
Utility Room
Walls & Ceilings
Windows

BEST OF
HOME IMPROVEMENT
Flooring
Decks
Mold Quiz
Home Safety
Tiling Techniques
Lighting Solutions
Weekend Projects
DIY to the Rescue
Home Renovations
Bathroom Makeover
Kitchen Renovations
Ultimate Media Room
Be Your Own Contractor

SPONSOR LINKS

  • Faux-Finished Door and Finishing Touches
  • From "DIY to the Rescue"
    episode DTTR-201


    PHOTO

    After: The Schulers' New Study
    Cost of Professional Installation: $3,500
    Cost of Materials: $1,025
    Amount Saved by "Doing It Yourself": $2,475
    The original door leading from the pipe organ room to the garage is metal. To create the warm appearance of wood, Amy Devers teaches Dawn Schuler a wood-graining technique.

    Materials:

    Sandpaper
    Tack cloth
    Paint brushes
    Paint base coat
    Aniline stain
    Linseed oil
    Turpentine
    Varnish
    Spray varnish
    advertisement


    PHOTO

    Figure A
    PHOTO

    Figure B
    PHOTO

    Figure C


    1. Remove door from hinges and bring to work area. Scuff sand the door to knock off sheen on original oil-based paint. Use a tack cloth to remove the debris.

    2. Apply base coat of oil-based paint (figure A). We use a burnt umber color to start our replication of pine, but any color can be used depending on the wood you want to replicate. Tip: Oil-based paints tend to dry quickly, so be sure to finish working in an area and feather the coat out the the surface edge before it has a chance to dry.

    3. Dry thoroughly, preferably overnight. Next, create a mixture of 1 part varnish, 2 parts aniline stain and 2 parts linseed oil. The aniline stain is a non-grain raising stain and helps create texture. Brush this mixture onto the door with a dry brush.

    4. Before the coat sets up too much, drag a pattern through the applied stain with a separate dry brush in long strokes. This creates a grain-pattern undercoat (figure B). Allow to dry thoroughly.

    5. Next, lightly scuff sand the second coat and clean debris off with a tack cloth.

    6. Create a mixture of 3 parts turpentine with one part aniline stain. Brush this onto the door in sections using a dry brush. Use long, flowing strokes.

    7. Immediately "knock down" the mixture with a dry rag. Use a separate dry brush to drag in a wood grain movement (figure C). Continue this process until door is complete.

    8. Allow door to dry thoroughly overnight, then finish with a coat of spray varnish. Allow varnish to dry thoroughly before hanging the door.

    To complete the room, gray primer is applied to the walls and allow to dry before a deep red paint is added. The crew also adds new shelves, removes a window and adds a stained glass panel. The result? A study that's rich, cozy and turns "organ room" into "organized room"!

  • ALSO IN THIS EPISODE: