| Move It Outside Pt. 2: Outdoor Fireplace and Lights |
| DIY pro Jay Baker helps outfit a home for outdoor entertaining. Project number two is the installation of an outdoor fireplace. |
From "Move It Outside" episode DMIO-102 |
|
|
(Continued from page )
 |

 The fireplace before the stucco is applied
|
|  |

 Stucco applied
|
|  |

 The completed fireplace
|
|
Installing the Modular Fireplace: Concrete FoundationTools and equipment: modular fireplace kit cement mixer (optional) wheelbarrow trenching unit concrete saw hammer hoes jigsaw level rake shovels soldering iron spades stucco brushes/sponges tape measure trowel brush Materials: mortar mix quick setting concrete sand cinderblocks real stone fabricated stone copper tubing copper T's PVC pipe rebar frame rebar steel 2x4s fire glass
Steps:- Determine the best location for your fireplace, then measure and dig a hole measuring 1 foot deep by 16 feet wide (figure A). (Use shovels or a utility loader with a bucket attachment.)
- Important: Hire a licensed propane plumber to install copper lines from the propane tank to the modular fireplace (figure B).
Lay a rebar frame inside the hole for extra support. Important: When complete, this fireplace weighs 1,100 pounds, so a strong foundation is critical. Pour a bed of concrete for the footers, making sure the propane line is kept elevated and out of the way (figure C).
After the concrete bed has dried, cover it with a course of cinderblocks, the fill the center portion with dirt and gravel (figures D and E).
Attach 2x6 wooden beams around the outside of the cinderblocks to enclose the fireplace foundation (figure F).Fill the foundation with another wheelbarrow full of concrete (figure G). Spread it evenly across the cinderblocks with a rake, then use a trowel to level the area.
| ALSO IN THIS EPISODE: | | Move It Outside Pt. 2: Outdoor Fireplace and Lights |
|