DIY Network

• The P-trap (figure J) serves as the conduit for the drain, but also serves another important purpose (aside from catching loose wedding rings). The curved portion holds water and forms a barrier that keeps sewer and drain fumes from entering the house.

• Install the P-trap by lining it up and tightening the brass ring securely onto the bottom of the drain (figure K), then hand tighten the other end to the sewer line.

• In keeping with the look of the stainless steel counter top, sink and appliances, we installed stainless-steel cabinet doors on the fronts of the cabinets. We began by installing the cabinet-door frames in the cabinet openings (figure L). These pre-fabricated frames have hinge-brackets built in. They also have pre-drilled holes so they are easily secured to the cabinet using 2-inch decking screws.

• Once the metal frames are in place, simply insert the stainless-steel doors into the hinges in the frame (figure M).

Important: Included in this segment are the steps in this outdoor home-improvement project as shown in the episode. These steps are general guidelines that are applicable for similar construction projects. For any construction projects, there may be procedures, specifications, equipment, etc. that are specific to the specific site and circumstances. There may also be variations according to the type and brand of materials you select. Always consult local building codes when undertaking significant home-improvement projects, and read and follow the manufacturer's directions and precautions that come with any materials, tools or equipment you decide to use.

Next: Finishing Touches

1 | 2