 |
|
Gleaming stainless-steel doors give this kitchen a hip, urban look.
|
Materials: tape measure
1x scrap lumber
clamps
drill
impact driver Steps: 1. Clamp a piece of 1x to the bottom of the cabinet, leaving 1/2 inch between the bottom of the opening and the top of the board. Using a ledger board will ensure all the cabinet doors are set at the same height. 2. Hold the door up to the cabinet, pre-drill the screw locations and attach the door to the cabinet with 3/4-inch pan-head screws. Resources: stainless steel cabinet doors
Frigo Design
Website: www.frigodesign.com cabinet hardware
Lee Valley Tools Ltd.
Website: www.leevalleytools.com woven wood shades
Budget Blinds
Website: www.budgetblinds.com windows
A-Craft Windows
Minneapolis, Minn.
Phone: (612) 722-7255 refrigerator, dishwasher, range, microwave
DCS By Fisher Paykel
Website: www.dcsappliances.com countertop wine chiller
Danby Appliances
Website: www.danby.com
| 
