DIY Network

Vinyl Tile Flooring From "Kitchen Renovations" episode DKTN-410

In this second segment host Paul Ryan and the volunteers determine the layout for the vinyl tile flooring. They begin the flooring installation and Paul gives some tips on setting adhesive and making cuts.

advertisement

	In this episode the Fairview University Medical Center children's lounge kitchen (seen here) ...
	is converted into a modern, attractive kitchen with maple cabinets, ...
	a sturdy, quartz sink with all the amenities and ...
	a state-of-the-art range to top off this masterful renovation!

Materials and Tools for Flooring Installation --

Dust mask
Safety glasses
Work gloves
Kneepads
Vinyl strip flooring
Random orbital sander
Tape measure
Pencil
Chalk line
Hairspray
Acrylic adhesive
1/16" V-notched trowel
Laminate roller
Piece of plywood
Utility knife
100 lb. roller

Materials and Tools for Cabinet Installation --

Safety glasses
Stock cabinets
Fill stock
Shims
Level
3" cabinet screws
Screw gun
Spade bit
Jigsaw
Clamps

Materials for Sink Installation --

Sink
Silicone
Caulk gun
Acetone
Rubber gloves

	Figure A
	Figure B
	Figure C
	Figure D

Vinyl Tile Flooring

Note: The flooring that Paul chose has the look of hardwood (figure A), but it's actually a vinyl-strip product. Real wood would never work in this situation due to the heavy usage.

1. Make sure the subfloor is smooth and dry. Sand out (figure B) any uneven patches.

2. To establish a reference line, measure out approximately 8' from the back wall and make a reference mark. Make another parallel reference mark at the same distance out. Snap a chalk line between the two marks to establish a reference line.

   DIY Tip: Spray hairspray on the line to keep it from rubbing out.

3. Stir the acrylic adhesive for the floor well before using.

4. Starting at the reference line, use a 1/16" V-notched trowel to spread adhesive evenly over the floor. Hold the trowel at a 60-degree angle to the floor.

5. Adhesive has to "flash" or get tacky before flooring is set down. Wait five to 15 minutes for adhesive to set, depending on the temperature and humidity. You can tell when the adhesive is ready -- when it lightly transfers onto your fingers.

6. Determine the layout of vinyl strips; use a staggered layout for a more realistic layout.

7. To transfer an unknown wall angle to the strip, lay a strip of tile on the side of reference that doesn't have adhesive. Lay another strip down but have it run along the wall, overlapping the first strip (figure C). Draw a line along the edge of the top strip to transfer the angle.

8. Put a scrap under the tile and cut the angle with a utility knife. Save the cut off and use it to transfer your angle onto the next strip.

9. Lay the tile on the adhesive and firmly press down. Take care to press it (not slide it) into position.

10. If you get adhesive on the tile, you can wipe it up with a damp rag.

11. Use a laminate roller (figure D) to set it in place.

12. Use a 100-pound roller as you go along to make sure you get good adhesion.

In the next segment Paul gets help installing the cabinets -- and the undermount sinks are mounted to the countertop.

RESOURCES :

Vinyl Tile Flooring
Brand name: Amtico Luxury Vinyl Tiles
Model #: W731E
Color: Wild Cherry
Amtico International
Website: www.amtico.com

Cabinets and Trim Style: Rutland Maple
Color: Salem
Brandom Cabinets
Website: www.brandom.com

Cabinet Hardware
Style: 26" Brushed Chrome Wire Pulls, 4" centers
Brand name: Amerock
Model #: BP979-26D
Color: Brushed chrome
Knobby Kneeds
We apologize no contact information is available.

Cambria Quartz Countertops
Brand name: Cambria
Color: Nottingham 7120
Cambria
Website: www.cambriaUSA.com

Undermount Sink and Faucet
Name: Undertone Kitchen Sink
Model #: K-3333

Name: Triton Kitchen Faucet Base
Model #: K-7779-K-CP
Color: Polished Chrome

Name: Triton Wristband Handles
Model #: K-16012-5-CP
Color: Polished Chrome
Kohler Co.
Website: www.kohlerco.com

Kitchen Appliances
Product: Cookton
Model #: DECU1054B

Product: Wall Oven
Model #: DES0171

Product: Microwave Oven
Model #: DM0S200

Product: Microwave Oven Trim Kit
Model #: DMTK275
Product: Built-In Refrigerator
Model #: DFUD042D
Color: Stainless Steel

Product: Range Hood
Brand name: Zepher
Model #: ZTA-E30
Color: Stainless Steel
LakeView Appliance
Website: www.lakeviewdist.com

Touch-Free Ice Maker/Water Dispenser
Brand name: Scotsman
Model #: MDT2C12
Scotsman Ice Systems
Website: www.scotsman-ice.com

Washer/Dryer Combo
Brand name: Majestic
Model #: MJ9900
Color: White
Majestic Appliances, Division of MSI
Website: www.majesticappliances.com

Crestfire Electronic Fireplace
Brand name: Heat and Co.
Model #: CF260E
Fireside Hearth and Home
Website: www.firesideusa.com

GUESTS :

Craig Tolzman
Cambria
11000 W. 78th St., Suite 220
Eden Prairie, MN 55344
Toll-free: 866-226-2742
Website: www.cambriaUSA.com