Materials:caulk
caulking gun
construction adhesive
drill with masonry bits and countersink bit
finishing nails
handsaw
level
masonry screws.
measuring tape
pediment and pilasters
pencil
puddy knife
pry bar
safety glasses
1. The crew removes the old pediment and trim, then positions the new pediment. The pediment is positioned as desired--checked for level--and marked figure A).2. Next, the crew measures from the mark made at the bottom of the pediment to the stoop (figure B). The pilasters are marked and cut with a handsaw. The cut pilasters are held against the brick surface of the home and two holes are marked at the top and middle of each pilaster.
)
)
