DIY Network

Canopy and Workspace Find out how to create a private and elegant space for a teenage girl. From "Ready As She Grows" episode DASG-104

(Continued from page 5)

Vanity Pullout

A track system is installed into a vanity which offers hidden storage.

advertisement

Vanity

Paint:

Memorable Rose SW6311

Materials:

14" track system
1/8" plywood
1"x2" lumber
drawer pulls
drill and spade bit
nails

	Figure L
	Figure M
	Figure N

Note: This works best in a piece of furniture with pull open shelves, and a minimum depth of 14 inches. Also, adjust the following measurements to fit your project.

1. Start with a piece of 1/8 inch plywood, and then cut it to 14" x 29" wide.

2. Create a simple frame of 1 x 2 lumber by cutting two pieces to 14 inches and two pieces 29 inches wide. Nail the pieces together with two inch nails.

3. Add the 1/8 inch plywood piece to the top of the 1 x 2 frame (figure L) with nails.

4. Paint the interior of the furniture and all of the plywood shelves "Memorable Rose".

5. Add two decorative knobs to the top of the plywood and 1 x 2 frame, as pulls.

6. Install a 14 inch track system to the inside of the vanity (figure M). Follow the manufacturer's instructions for installation.

7. Drill a hole into the back of the vanity with a one inch spade bit to allow for the cord from the lighted mirror.

8. Install the pullout tray (figure N).

1 | 2 | 3 | 4 | 5 | 6

RESOURCES :

Sherwin Williams
Website: Sherwin-Williams.com

JoAnn Fabrics Store
Website: www.jo-ann.com

Lowe's Home Improvement Store
Website: www.lowes.com

GUESTS :

Dr. Donna Mehregany
Child Psychiatrist
Rainbow Babies and Children's Hospital
We apologize no contact information is available.

Jennifer Vitale, MSW
Child-life Specialist
Rainbow Babies and Children's Hospital
We apologize no contact information is available.