1. Cut two pieces of PVC to 77 inches, and two pieces to 40 3/4 inches.2. Attach the PVC with elbows to create a four-sided curtain rod (figure G).
3. Install hooks on the underneath side of the canopyone hook per side.
4. Attach corresponding eyes to each of the four PVC lengths (figure H).
5. Add curtains to the PVC using the pocket, placing the opaque curtains at the end of each long sidethese will be at the "head" of the bed, and at the corners. The translucent curtains should be along the two long sides, and on the short "back" side (figure I).
6. Hang the PVC pipe using the hook and eye system.
7. Tie back the curtains using decorative ribbon.