HOME IMPROVEMENT Index
Appliances
Basement
Bathrooms
Bedrooms
Cleaning
Contractors
Doors
Driveways & Paths
Duct Tape
Electrical Systems
Family Room
Fences & Gates
Fireplace
Floor Coverings
Furniture
Handles, Knobs & Hinges
Help on the Homefront
Home Energy Efficiency
Home Office
Homeowner in Process
House Exterior
Indoor Pests
Kitchens
Lighting
Outdoor Equipment
Outdoor Structures
Painting
Plumbing
Safety
Sports-Related Additions
Staining
Stairs
Storage
Tools
Utility Room
Walls & Ceilings
Windows

BEST OF
HOME IMPROVEMENT
Flooring
Decks
Mold Quiz
Home Safety
Tiling Techniques
Lighting Solutions
Weekend Projects
DIY to the Rescue
Home Renovations
Bathroom Makeover
Kitchen Renovations
Ultimate Media Room
Be Your Own Contractor

SPONSOR LINKS

  • Wall Painting
  • Learn how to create colorful wall stripes with tape and paint.
    From "Ready As She Grows"
    episode DASG-102


    In this first segment, a painting technique using painters tape is applied to the walls creating a colorful and fun atmosphere for the room.

    advertisement


    PHOTO
    Paint:

    Sockeye SW6619
    Cosmetic Peach SW6618
    Feather White SW6616
    Honeycomb SW6375
    Hopeful SW6597
    Tanager SW6601
    Leapfrog SW6431
    Fabulous Grape SW6293
    Avid Apricot SW6639

    Materials:

    paint rollers
    brushes
    paint trays
    drop cloths
    pencil
    painters blue tape
    flexible ruler

    1. Paint the top 12 inches of the wall, the ceiling and all trim with the "Feather White" paint.

    2. Tape around the room at the bottom of the feather white, and then again around the room approximately 35 inches below the tape line. Paint the portion of the wall between the two strips of tape with "Cosmetic Peach".

    3. Remove the tape and allow the walls to dry thoroughly before beginning the decorative techniques.

    4. Measure up 35 inches from the top of the base board, and then mark the wall. Continue marking the wall every one to two feet around the room. This will become the area for the stripes.

    PHOTO

    Figure A
    PHOTO

    Figure B
    PHOTO

    Figure C
    5. Place painters blue tape on the wall to create the stripes (figure A). Add additional tape to create a two inch wide stripe and slanted at different angles to create various stripe widths.

    6. Before painting the stripes, create the top wave. Using the lower edge of the "Cosmetic Peach" portion of the wall as a guide, free-hand or use a flexible ruler to create waves. The top wave will be the "Sockeye" color.

    7. Paint the stripes using 6 different colors (figure B). Vary the colors of each stripe around the room. You'll need to paint alternating stripes one color at a time, and then allow them to dry before continuing.

    8. When the stripes are done and thoroughly dry, remove the tape.

    9. Use the top line of the stripe field and measure up approximately 6 inches. This will become the top of the lower wave. Draw the lower wave outline, and then paint with "Cosmetic Peach". Cut in the edge along the stripe portion of the wall for a clearly defined line (figure C).

  • RELATED PROJECTS:

  • ALSO IN THIS EPISODE: