HOME IMPROVEMENT Index
Appliances
Basement
Bathrooms
Cabinets & Shelves
Faucets & Fixtures
Remodeling
Sinks & Vanities
Surround
Tiles & Grout
Toilets, Tubs & Showers

Bedrooms
Cleaning
Contractors
Doors
Driveways & Paths
Duct Tape
Electrical Systems
Family Room
Fences & Gates
Fireplace
Floor Coverings
Furniture
Handles, Knobs & Hinges
Help on the Homefront
Home Energy Efficiency
Home Office
Homeowner in Process
House Exterior
Indoor Pests
Kitchens
Lighting
Outdoor Equipment
Outdoor Structures
Painting
Plumbing
Safety
Sports-Related Additions
Staining
Stairs
Storage
Tools
Utility Room
Walls & Ceilings
Windows

BEST OF
HOME IMPROVEMENT
Flooring
Decks
Mold Quiz
Home Safety
Tiling Techniques
Lighting Solutions
Weekend Projects
DIY to the Rescue
Home Renovations
Bathroom Makeover
Kitchen Renovations
Ultimate Media Room
Be Your Own Contractor

SPONSOR LINKS

  • Reclaimed Flooring Installation
  • How to install reclaimed hardwood flooring
    From "Bathroom Renovations"
    episode DBTR-311


    Homeowners Nate and Carolyn save a little money by installing reclaimed hardwood flooring, which matches the wood throughout their house.

    advertisement


    PHOTO

    Figure A
    PHOTO

    Figure B
    PHOTO

    Figure C
    PHOTO

    Figure D
    Materials:

    rosin paper
    utility knife
    finish nailer
    nailset
    floor vent
    tape measure
    sliding compound miter saw
    safety glasses
    flooring stapler
    rubber mallet

    Reclaimed Flooring Installation

    1. Determine which way you want the flooring to run. It is generally best to go across the floor joists because it makes for a much stronger surface.

    2. Cover the plywood subfloor with rosin paper (figure A), which acts as a vapor barrier and cushions the wood.

    3. Measure from wall to determine where the transition board needs to go (figure B).

    4. Apply construction adhesive to floor and set transition board (figure C), then secure with a finish nailer (figure D). If the nails don't go all the way in, follow up with a nailset.

    5. Put another bead of glue along the wall because a starter board will go there (figure E). Set board leaving a 3/8" gap for expansion and contraction (figure F). The first few boards need to be nailed on the face until you are far enough away to use the flooring stapler (figure G). Tap the boards with a rubber mallet to tighten them against one another (figure H).

    Photo

    Figure E

    Photo

    Figure F

    Photo

    Figure G


    6. Notch the rosin paper out for any vents (figure I). Tap in the vent cover and face nail it (figure J).

    7. The rest of the boards can be fastened using the flooring stapler.
    Photo

    Figure H

    Photo

    Figure I

    Photo

    Figure J


    Do It Yourself Flooring
    For more information on flooring techniques, visit DIY's Flooring Center.



    RESOURCES :

    Steam Shower
    Steam Generator
    Model #: MS225TC1

    Tempo Plus Time & Temperature Control
    Model #: MSTPLUS-PC
    Color: Polished Chrome

    Autoflush Automatic Drain Valve System
    Model #: MS81500S

    Brand Name: Mr. Steam
    Website: www.mrsteam.com

    Tile
    Field Tile 3"x3"
    Model #: Floor Tile
    Color: 230 Matte Green

    Field Tile 3"x3"
    Model #: Single Bullnose
    Color: 230 Matte Green

    Brand Name: North Prairie Tileworks, Inc.
    Website: www.handmadetile.com


    GUESTS :
    Mark Torgeson, Contractor
    Northern Star Construction
    1632 W. 26th St.
    Minneapolis, MN 55405
    Telephone: 1-612-817-7406

  • ALSO IN THIS EPISODE: