DIY Network

Plumbing Access Panel Installation Easier access to the tub's plumbing is needed. From "Bathroom Renovations" episode DBTR-302

The plumbing for the tub is made accessible from the laundry room below by cutting a hole in the floor and adding an access panel.

advertisement

	Figure A
	Figure B
	Figure C

Materials:

tape measure
safety glasses
ear protection
reciprocating saw
circular saw
sliding compound miter saw
framing nailer
hammer
joist hanger

Plumbing Access Panel Installation

1. Determine the location of the access panel for the tub, mark the floor and cut along the edge with a reciprocating saw.

2. To cut the center, use a circular saw (figure A). Make a plunge cut then follow along the marks. Remove the boards (figure B).

3. Cut out the joist with a reciprocating saw (figure C).

4. Cut lam beams to length and rip them to the correct width. Tap them in place with a hammer.

5. Put lam beam in place and secure using a framing nailer (figure D), then add a joist hanger for support (figure E).

Figure D

Figure E

RESOURCES :

Shower Base
Product: Summer Rain by Jacuzzi 3-wall Shower System
Model #: U534, Color: Satin Chrome
Brand Name: Jacuzzi
Website: www.jacuzzi.com