DIY Network

Vanity Installation The bathroom's new addition is revealed. From "Bathroom Renovations" episode DBTR-301

The new vanity is anchored to the wall and then the undermount sink and faucet are added to complete this simple, functional update.

advertisement

	Figure A
	Figure B
	Figure C
	Figure D

Materials:

hammer
nail punch
safety glasses
gloves
caulk gun
silicone

Vanity Installation

1. Dryfit the new vanity and mark the holes for the anchors.

2. Tap the marks with a nail punch and a hammer to prestart the hole (figure A).

3. Drill holes for the anchors and move the vanity back in place.

4. Tap the anchors in with a hammer and then tighten with a ratchet (figure B).

5. Attach the faucet to the countertop.

6. Flip the countertop over and put a 3/8ths inch bead of silicone around the opening on underside of the counter (figure C).

7. Set the sink on the opening and look throughout the drain hole to make sure the sink is centered (figure D).

8. Set the clips and lightly tighten with ratchet, being careful not to crack the sink (figure E).

9. Flip over the sink and center it on the vanity. A bead of silicone will secure the countertop to the vanity.

10. The installation is complete (figure F)!

Figure E

Figure F

RESOURCES :

Bath Fan
Model #: PV005-09
Color: Brushed Nickel
Brand Name: Progress Lighting
Website: www.progresslighting.com

Vanity, Sink, Faucet and Accessories
32" Vanity w/ marble top (optional)
Model #: 9432.200 (vanity), 9432.492 (marble top)
Brand Name: Providence
Color: Weathered White

Undercounter sink
Model #: 0495.221
Brand Name: Ovalyn

Widespread faucet
Model #: 2555.801

Wall sconce
Model #:2555.081

Tumbler/toothbrush holder
Model #: 2555.091

Toilet paper holder
Model #: 2555.061

24" Towel bar
Model #: 2555.034

18" Towel bar
Model #: 2555.018
Manufacturer: American Standard
Website: www.americanstandard-us.com