DIY Network

Claw Foot Tub Installation From "Bathroom Renovations" episode DBTR-203

It’s time to bring in some major elements in this third of four episodes of Bathroom Renovations. Host Amy Matthews will help Stuart and Kelly install a claw foot style, soaking tub with whirlpool jets, and put in the motor unit for the tub. For the traditional elements, the team will bring in the antique-looking exposed tub filler and shower, and an English style ‘high on the wall’ pull chain toilet.

advertisement

	A tired '70s style bathroom...
	with blue fixtures and worn carpet...
	is updated into a luxurious, turn-of-the-century space...
	that looks beautiful inside this 1910 home.

Materials:

Tub Installation

hammer
PVC flexible hose
PVC primer and glue
circular saw
plumber’s putty
screwdriver
star wrench

Faucet Installation

tape measure
pencil
drill
torpedo level
hole saw
safety glasses

Drywall Patching

carpenter’s square
pencil
circular saw
self-adhesive fiberglass tape

Installing Pull Chain Toilet

wax ring
anchors and screws
screwdriver
tubing cutter
strap wrench

Tub Installation

1. Cut access holes in the drywall near the floor and ceiling (figure A).

2. Tape the end of the PVC hose to keep out debris (figure B), and then thread it through the wall and into the ceiling (figure C).

Figure A

Figure B

Figure C

3. Attach a coupler to the hose (figure D), using PVC primer and glue to make the connection (figure E).

Figure D

Figure E

4. Insert the check valve (figure F), and attach the pump (figure G).

Figure F

Figure G

5. Before putting the tub in place, make an access panel for the plumbing that needs to be done later for the faucet. From the open wall in the bathroom, drill four pilot holes through the drywall into the adjacent room (figure H). Then use a circular saw to cut out an access panel in the room (figure I).

6. Add plumber’s putty to the tub’s drain gasket (figure J) and fit the gasket and the waste line in place.

Figure H

Figure I

Figure J

7. Use a star wrench to tighten the drain gasket (figure K), and wipe away the excess putty.

8. Screw the strainer cap into place (figure L).

Figure K

Figure L

9. Slip the overflow onto the drain (figure M) and lock it in place with the retainer (figure N).

Figure M

Figure N

10. Attach drain lever to plunger rod (figure O), slide on the overflow cap (figure P), and screw into place (figure Q).

Figure O

Figure P

Figure Q

Figure R

11. Tighten the compression fittings on the drain (figure R).

Next: Installing Glass Block

RESOURCES :

Facuet/Shower
Product Name: Converto Shower
Model Number: 4024-PL-SN
Finish: Satin Nickel
Brand Name: Barclay Products
Website: www.barclayproducts.com

Manufacturer: Barclay Products Limited
4000 Porett Dr.
Gurnee, IL 60031
Phone: 1-800-446-9700

Contact:
Anna Williams, Public Relations Director
Phone: 1-847-244-1234
E-mail: annawilliams@barclayproducts.com

Speakers
Product Name: Sound Pads
Model Number: 5029
Brand Name: Sonic Impact
Website: www.si5.com

Manufacturer: Sonic Impact Technologies
2555 State St.
San Diego, CA, 92101
Phone: 1-619-232-2555

Contact:
Rich Bracke
Phone: 1-619-232-2555
E-mail: BigRich@si-technologies.com

Air Jet Tub
Product Name: Serenity 10-Clawfoot Airbath 72 x 40 x 30
Model Number: AI10AIR7240
Color: White
Brand Name: Aquatic
Website: www.aquaticwhirlpools.com

Manufacturer: Aquatic Industries, Inc.
11880 RR 2243 W
Leander, TX 78641
1-800-555-5324

Contact:
Tawnya Quiet, Marketing Director
Phone: 1-800-555-5324 x228
E-mail: tawnya.quiet@aquaticwhirlpools.com

Toilet
Product Name: Porcelain High Tank Water Closet
Model Number: 901-X
Finish: Brushed Nickel Fittings
Brand Name: Sunrise Specialty
Website: www.sunrisespecialty.com

Manufacturer: Sunrise Specialty
930 98th Ave.
Oakland, CA 94603-2306

Contact:
Glen Carter
Phone: 1-510-729-7277