DIY Network

Finishing Basement: Drywall From "Weekend Handyman" episode WKH-401

Host Paul Ryan puts up drywall in the basement as a substrate for the bamboo paneling. He also demonstrates a tip on using lipstick to transfer markings for electrical cutouts.

advertisement

	A weekend of work can take an unfinished space...
	that has a concrete floor and not much else...
	and turn it into a cozy family room just waiting for fun.
	Just look at the floor now!
	Figure A
	Figure B
	Figure C
	Figure D
	Figure E

Time: 18 hours over two days.
Difficulty Rating: This project rates a 2 out of 5 on the Weekend Handyman difficulty scale.

Materials:

Drywall

Safety glasses
Drywall
Drywall saw
Drill
Drywall screws
Lipstick
Pencil
Straight edge

Plyboo Paneling

Safety glasses
Drill w/ spade bit
Jig saw
Pencil
Heavy-duty construction adhesive
1/8" u-notched trowel
Rail-guided circular saw with an 80-tooth carbide blade
Hole saw
Shims

Railing

Safety glasses
Pencil
Tape measure
Laser level
Compound miter saw (blade set at 45 degree angle)
Impulse nailer
Sealer
Rubber gloves
Roller

Sub-floor Panels

Sub-floor
Safety glasses
Table saw
Tapping block
Mallet
Leveling squares
Level

Carpet Panels

Utility knife
Tape measure
Marking pencil
Straight edge
Vacuum

Drywall

1. If you're putting up a thin paneling, you'll want to put up drywall as a substrate for the paneling to attach to.

2. For transferring electrical outlet cutouts onto the drywall, use lipstick or another marking tool to leave an impression on the drywall (figure A). Trace around the outlet box (figure B), set the drywall in place and press it up against the boxes.

3. Use spacers so drywall doesn't touch concrete floor and possibly wick up any moisture that might be present in the concrete (figure C). Allow a 1/2" space between drywall and floor.

4. Use a drywall saw to cut outlet markings outside the lines on drywall (figure D).

5. Secure the drywall to the studs (figure E). Countersink the screws, making sure to only dimple the paper. You don't want to break through the paper or this will compromise the structural integrity of the drywall.

6. Make reference lines on the drywall (figure F) as stud reference when screwing (figure G).

7. For windows, cover the window and come back to cut it out after drywall is secure (figure H).

Figure F

Figure G

Figure H

RESOURCES :

Veneer Bamboo Paneling
Brand Name: Plyboo
Model Number: BP-V1896N
Style: Neutral Vertical, 1/8" x 48" x 96

Manufacturer: Smith & Fong Company
375 Oyster Point Blvd., Suite 3
South San Francisco, CA 94080
Telephone: 1-866-835-9859
Website: www.plyboo.com

Modular Sub-floor System
Brand Name: DRIcore

Manufacturer: DRIcore
2311 Royal Windsor Dr.
Mississauga, ON L5J 1K5 Canada
Telephone: 1-866-976-6374
Website: www.dricore.com

Carpet Panels
Color: Magnolia (Inset Color)
Model Number: 545502
Color: Green Marble (Border Color)
Model Number: 545502
Brand Name: Legato
Website: www.Legatocarpets.com

Manufacturer: Milliken Carpets
201 Lukken Industrial Dr.
LaGrange, GA 30240
Telephone: 1-800-241-8666

GUESTS :

Dave Murray, Director of Marketing
Telephone: 1-866-976-6374

Scott Schwasnick, National Acct Mgr.
Telephone: 1-800-241-8666