Repairing and staining a deckThe biggest obstacle to repairing the deck: a tree is growing up through one of the steps on the deck. Jason cuts the tree down with a chain saw (figure A), then replaces the step, using pressure-treated board. He attaches the board with deck screws, which are less likely than nails to loosen over time.
Jason and his crew also use an environmentally-friendly stain to protect the wood against water, UV rays and fungus without harming the environment. Using rollers with 3/4" nap, the crew applies the stain and allows it to cure for 24 hours. (The stain dries to the touch in two to four hours.)
Tip: You'll know it's time to apply a new coat of stain if you sprinkle water on the deck and the water is absorbed into the wood.
Dressed in its new stain and flanked by beautiful but low-maintenance trees and shrubs, the porch promises plenty of pleasant vacation days ahead (figure B).
Jason also fences off the back- and side yards and creates a beautiful gate that will be a focal point. Get tips on building a gate.
environmentally-friendly stain - Defy Epoxy Fortified Wood Stain - SaverSystems