DIY Network

70 How-Tos From Ed Del Grande

  1. 51. How to Install a Point-of-Use System

    Learn how to have instant hot water at every faucet by installing a point-of-use system in the home.

    Time:
    Day
    Cost:
    $500 to $1000
    Difficulty:
    Moderate
  2. 52. How To Install a Sump Pump

    Find out how to install a sump pump to run water away from your house.

    Time:
    Under Half Day
    Cost:
    $100 to $250
    Difficulty:
    Moderate to Hard
  3. 53. How to Remove an Old Dishwasher

    Ed the Plumber host Ed Del Grande demonstrates how to remove an old dishwasher with these step-by-step instructions.

    Cost:
    $1 to $50
    Difficulty:
    Easy
  4. 54. How to Install a Dishwasher

    Learn how to install a new dishwasher.

    Cost:
    $250 to $500
    Difficulty:
    Moderate
  5. 55. How To Install an Outdoor Water Source

    Follow these steps to produce an outdoor water source to dispense water around the yard.

    Time:
    Day
    Cost:
    $250 to $500
    Difficulty:
    Moderate to Hard
  6. 56. Prepare the Area for Valve Installation

    Host Ed Del Grande demonstrates how to prep the area to begin installing a mixing valve on a water line.

    Cost:
    $1 to $50
    Difficulty:
    Easy
  7. 57. How To Install an Anti-Sweat Valve

    An anti-sweat valve is a component that mixes the hot and cold water, keeping the water tank from sweating. Learn how to install one he...

    Time:
    2 hours
    Cost:
    $100 to $250
    Difficulty:
    Moderate to Hard
  8. 58. How to Install a Stop and Waste Valve

    Use these step-by-step instructions and easily install a stop and waste valve in no time.

    Time:
    Under Half Day
    Cost:
    $100 to $250
    Difficulty:
    Moderate
  9. 59. How to Rebuild a Toilet Tank

    Learn how to rebuild an old toilet tank by replacing the inner parts.

    Time:
    2 hours
    Cost:
    $50 to $100
    Difficulty:
    Easy to Moderate
  10. 60. How To Install a Utility Sink

    Follow these steps to install your own utility sink.

    Time:
    Day
    Cost:
    $100 to $250
    Difficulty:
    Moderate to Hard

About Ed Del Grande

Ed Del Grande, DIY Network's three-time Master Plumber and contractor, was born and raised in a family-owned plumbing business.

Read Full Bio

Projects By Room

View:

Advertisement

Shows You’ll Like