DIY Network

70 How-Tos From Ed Del Grande

  1. 41. Prepare the Area for Valve Installation

    Host Ed Del Grande demonstrates how to prep the area to begin installing a mixing valve on a water line.

    Cost:
    $1 to $50
    Difficulty:
    Easy
  2. 42. How to Install a Stop and Waste Valve

    Use these step-by-step instructions and easily install a stop and waste valve in no time.

    Time:
    Under Half Day
    Cost:
    $100 to $250
    Difficulty:
    Moderate
  3. 43. How To Install an Anti-Sweat Valve

    An anti-sweat valve is a component that mixes the hot and cold water, keeping the water tank from sweating. Learn how to install one he...

    Time:
    2 hours
    Cost:
    $100 to $250
    Difficulty:
    Moderate to Hard
  4. 44. How to Rebuild a Toilet Tank

    Learn how to rebuild an old toilet tank by replacing the inner parts.

    Time:
    2 hours
    Cost:
    $50 to $100
    Difficulty:
    Easy to Moderate
  5. 45. How To Install a Utility Sink

    Follow these steps to install your own utility sink.

    Time:
    Day
    Cost:
    $100 to $250
    Difficulty:
    Moderate to Hard
  6. 46. How to Install an Under-Sink Water Filtration System

    These basic instructions show how to install an under-sink reverse osmosis water filtration system.

    Time:
    2 hours
    Cost:
    $100 to $250
    Difficulty:
    Moderate
  7. 47. How to Join Pipe

    Ed the Plumber gives step-by-step instructions on how to join copper pipe and how to join PVC pipe.

    Cost:
    $1 to $50
    Difficulty:
    Easy
  8. 48. How to Rebuild a Bathroom Faucet

    Learn how to identify and rebuild a leaking bathroom faucet in no time with these basic step-by-step instructions.

    Time:
    Under Half Day
    Cost:
    $1 to $50
    Difficulty:
    Easy to Moderate
  9. 49. How to Remove and Replace a Kitchen Faucet

    Learn how to remove and replace a kitchen faucet with these simple step-by-step instructions.

    Time:
    2 hours
    Cost:
    $100 to $250
    Difficulty:
    Easy to Moderate
  10. 50. How to Install a Dehumidifier Pump

    Ed the Plumber host Ed Del Grande explains how to install a pumping system that will clear out a dehumidifier's bucket so it will work ...

    Time:
    Under Half Day
    Cost:
    $50 to $100
    Difficulty:
    Moderate

About Ed Del Grande

Ed Del Grande, DIY Network's three-time Master Plumber and contractor, was born and raised in a family-owned plumbing business.

Read Full Bio

Projects By Room

View:

Advertisement

Shows You’ll Like