DIY Network

70 How-Tos From Ed Del Grande

  1. 31. How to Snake the Main Drain

    Sometimes unclogging a drain can be difficult. That's where a jetting machine comes in to tackle the situation.

    Time:
    Under Half Day
    Cost:
    $100 to $250
    Difficulty:
    Easy to Moderate
  2. 32. How to Unclog a Bathroom Sink

    Use these step-by-step instructions to see how a few common plumbing tools can easily get a bathroom sink unclogged.

    Cost:
    $1 to $50
    Difficulty:
    Easy
  3. 33. How to Check a P-trap for a Clog

    Ed the Plumber explains how to how to remove a P-trap and check it for a clog.

    Cost:
    $1 to $50
    Difficulty:
    Easy
  4. 34. How to Unclog a Bathtub Using the Trip Lever

    A trip lever is a fairly easy tool to use when a bathtub drain is clogged. Use these step-by-step instructions to get the drain unclogg...

    Cost:
    $1 to $50
    Difficulty:
    Easy
  5. 35. How to Install a Body Shower

    Ed the Plumber gives step-by-step instructions on how to install a body shower. The shower is installed right into an existing shower s...

    Time:
    Day
    Cost:
    $250 to $500
    Difficulty:
    Moderate
  6. 36. How to Repair a Kitchen Faucet

    Learn the basics of kitchen faucet repair and how to replace the stems, seals and springs to create a whole new faucet.

    Cost:
    $1 to $50
    Difficulty:
    Easy
  7. 37. How to Rebuild a Leaking Sillcock

    Learn how to rebuild a leaking sillcock in a home with these basic step-by-step instructions.

    Cost:
    $1 to $50
    Difficulty:
    Easy
  8. 38. How to Replace a Toilet and Connect the Water Lines

    These step-by-step instructions show how to replace a toilet and include the following steps: Remove the water, disconnect the tank, in...

    Time:
    Under Half Day
    Cost:
    $100 to $250
    Difficulty:
    Moderate
  9. 39. Installing Water Line Connections for a Steam Shower

    If you're installing a steam shower in your bathroom, you'll have to add a water line connection. Host Ed Del Grande shows how to insta...

    Time:
    Under Half Day
    Cost:
    $50 to $100
    Difficulty:
    Moderate
  10. 40. How to Install Running Water Lines for a Steam Shower

    Installing running water lines is the first step to getting a steam shower in a bathroom.

    Time:
    Day
    Cost:
    $100 to $250
    Difficulty:
    Moderate

About Ed Del Grande

Ed Del Grande, DIY Network's three-time Master Plumber and contractor, was born and raised in a family-owned plumbing business.

Read Full Bio

Projects By Room

View:

Advertisement

Shows You’ll Like