 |
| Concrete Patio, Stone Upgrade |
| This DIY kit brought to you by Oldcastle® will provide tips on upgrading your concrete patio with pavers. |
|
advertisement
|
Transforming a plain concrete pad into a beautiful cobblestone patio is easy. - Start by sweeping debris from the concrete.
- In one corner, begin placing pavers against the wall (figure A).
- In this project, an 8x8 four cobble paver was used that creates a professional looking multiple piece pattern (figure B). For a more random look, use a partial piece to begin every other row.
- Work outward, butting pavers against each other.
- For the outside edge, apply thinset mortar to the concrete then press the pavers into place (figure C).
- Finish by sweeping sand into the crevasses to create grout (figure D).
This is a weekend project any do it yourselfer can do, and the results will last a lifetime. Web Extra: - A larger-sized paver dramatically reduces installation time. Designs such as the four cobble paver provide the look of four different stones in one single unit. You can change the pattern by turning the paver in different ways, or by using half rows to offset the pattern.
- If your dimensions do not come out evenly, you'll need cut pavers to create a partial row. Use a circular saw or chop saw with a diamond blade for cutting concrete. If possible, use full pieces for the border and cut pieces inside the border row.
- Gluing the outside row in place will keep them from slipping and anchor the stones in place. Allow sufficient time for the adhesive to cure before walking on the patio to add sand.
RESOURCES :
Oldcastle® Information
Building Performance and Growth
Website: www.http://www.myoldcastle.com
| 
)
)
)
)
WINDOWS MEDIA VIDEO
