DIY Network

Plastic Bottle Trellis Turn trash into outdoor art. From "B. Original" episode DBOR-608

Let your vines climb something fun.

It's amazing at how fast empty soda and water bottles can pile up – and how much space they take up until recycling day.

Instead of stuffing them in the recycling bin, recycle those empties the B. Original way by making Michele Beschen's funky outdoor trellis from empty plastic bottles and an old ladder. Once you get the technique down, you'll find lots of ways to use bottles. Scroll down to get started.

advertisement

	Figure A
	Figure B
	Figure C
	Figure D
	Figure E
	You'll find plenty of fun uses for these bottles and caps.

Plastic Bottle Trellis

Materials:

empty plastic soda, water, or juice bottles
old ladder
heat gun
heavy gloves
vise
large pair of pliers
acrylic or plastic paints
drill with 1/8" bit
safety glasses
monofilament
wire
beads

• Remove any labels from the bottles. Make sure they're rinsed out and dry before starting the project.

• Secure the neck of a bottle in a vise and use a heat gun to soften the plastic (figure A).

• Wearing leather gloves, grasp the bottle, twisting and scrunching it into the desired shape (figure B).

  Safety Alert: Wear leather gloves when handling the hot bottle to prevent burns.

• Remove the bottle from the vise and let it cool. Repeat the heating and shaping process on the other bottles.

• Dilute some acrylic or plastic paints slightly with water. Also add a little water to the bottle. For clear bottles, pour multiple colors of paint into the bottle, replace the cap and shake the bottle to swirl the paint (figure C). For colored bottles, apply plastic paint to the outside of the bottle so it won't be hidden by the bottle color.

• If using the bottle caps in the piece, paint them as well.

• Let the paint dry.

• Wearing safety glasses, use a drill with a 1/8" bit to create a hole in the bottom of each bottle (figure C). If using caps on the bottles, drill a hole in each cap as well.

  Safety Alert: Always wear safety glasses when using a power drill.

• Use monofilament or fishing line to string the bottles together: Tie the end of the monofilament to a piece of wire about 8" long. Use this wire as a needle to pull the monofilament in through the bottom hole and out through the top hole of each bottle. Michele Beschen prefers to insert the monofilament in the bottom of the bottle; it’s much easier than trying to hit the hole when inserting from the top of the bottle.

• At the bottom of the strand of bottles, attach a bead and tie it off with a knot.

• Use the excess monofilament to tie the strands to the top and bottom rungs of the ladder (figure E). Create multiple strands to cover the ladder.

• Place the new trellis in the garden with climbing vines and plants around the base. You also can hang these colorful bottles individually throughout the garden.