DIY Network

Vintage Fabric Wrist Cuff Learn how to make a vintage wrist cuff with fabric. From "Stylelicious" episode DSTY-109

Host Vickie Howell shows you an easy way to create a fabric wrist cuff.

advertisement

	Vickie proves how easy it is to create adorable wrist cuffs.
	Figure A
	Figure B

Materials:

2 scrap pieces of fabric
2 set of small snaps
belt buckle

Vintage Fabric Wrist Cuff

This project takes approximately 30 minutes.

1. Cut two scrap pieces 2-1/2" wide and 1-1/2" longer than your wrist.

2. Pin the two pieces of fabric right sides together and pin.

3. Sew at a 1/4" seam allowance around three sides.

   Note: Leave one of the width wise edges open.

4. Turn right side out.

5. Fold in the open edge 1/4" and sew a hidden stitch (figure A).

6. Sew two male snaps on the wrong side of one end of the width wise edge.

7. Sew two female snaps on the right side of the opposite end and side of the width wise edge (figure B).

8. Slip on the belt buckle.