DIY Network

Hand-Applied Zipper From "Sew Much More" episode SMM-302F

advertisement

	Figure A
	Figure B

The zipper in one dress was applied by machine, following pattern instructions. Applying a zipper by hand, however, ensures that the stitches will be hidden (figure A).

Steps:

1. Thread-mark the zipper opening. On the dress right back, mark a second line 1/8" into the seam allowance. Stitch the right side of the zipper so the teeth are next to the new line (figure B).
   
   
2. On the left side of the zipper opening, press the center back seam along the original seam line. Close the zipper and pin through all layers. Open zipper and stitch the zipper tape to the seam allowance only.

3. Do a hand-prick stitch through all layers, using seam guide tape as a guide, if necessary.

   Note: Run your thread through beeswax and press with a warm iron to help the thread go through the fabric more easily.

RESOURCES :
Butterick / Vogue Patterns
Due to seasonal changes, the exact patterns seen on the show are not generally available. Visit your local fabric store for similar patterns.
Butterick / Vogue
Website: www.butterick.com/ www.voguepatterns.com

Michael Levine Fabrics Inc.
Michael Levine Fabrics Inc.
Los Angeles , CA 90015-1812
Phone: 213-622-6259
Email: sales@mlfabrics.com
Website: www.mlfabrics.com