DIY Network

Duct Tape Wastebasket Learn how to create a unique duct tape wastebasket. From "Craft Lab" episode DCLB-146

Guest Sonya Nimri joins host Jennifer Perkins and demonstrate how to create a duct tape wastebasket.

advertisement

Create a colorful duct tape wastebasket.

Duct Tape Wastebasket

Project designed by Sonya Nimri.

Materials:

4 rolls of duct tape in white, hot pink, yellow, red and orange
scissors
wastebasket

1. Take white duct tape and run it across your wastebasket diagonally taping it to the inside about three inches into the bin.

2. Take the tape on the bottom and rip it up the middle until the edge of the wastebasket's side. Tape the two across each other on the bottom until they reach the middle.

3. Next, take the hot pink duct tape and start it a half inch in from the start of the white duct tape. Repeat the taping process.

4. Tape red, hot pink, orange, hot pink in 1/2" wide strips then use the yellow in a 1/4" strip, then return to the white again, and repeat step one.

5. Repeat until the wastebasket is covered. Take a strip of red and cover the rough edges in the inside of the wastebasket by making a horizontal line all around the inside.

6. Turn it over and tape a yellow square at the bottom of the can. Cut a heart out of pink duct tape and tape it to the middle of the yellow square.

RESOURCES :

Duct Tape
Henkel Consumer Adhesives
Website: www.henkelca.com

GUESTS :

Sonya Nimri
Phone: 310-396-6243
E-mail: Sonya@sonyastyle.com
Website: www.sonyastyle.com