AUTOS & BOATS Index
Auto Restoration & Kit Cars
Air Conditioning
Automotive Body Work
Automotive Cooling System
Electrical Systems
Exhaust System
Fuel Systems
Boats
Brakes
Buying
Detailing
Engine
Exterior
Interior
Parts & Accessories
Safety
Security
Small Engines
Stereo
Suspension
Tires
Tools
Trailers
Transmission
Vehicle Types
Windows

Best of Autos Boats
Classic Car Restoration
Preventive Maintenance
Ultimate Car-Care Guide

SPONSOR LINKS

  • Reducing Driver Distraction: MP3 vs. CD Players
  • From "Auto Primer"
    episode DAPR-104


    PHOTO

    This CD player will also play CD-Rs filled with music in MP3 format. With that technology, you can store up to 12 hours of music on a single disc.
    NOTE: Images on this page may be enlarged for enhanced viewing simply by clicking on them.

    This episode of DIY's Auto Primer focuses on driver safety, eliminating distraction, defensive driving and safe-driving tips.

    In this second segment of episode 104, Leilani shows how to install a CD player that also plays MP3's.

    Materials:

    Standard automotive tools (socket-wrenches, screwdrivers, nut-drivers, etc.)
    MP3-capable CD Player
    Dash adapter kit
    Wiring harness adapter
    Crimp-on connectors
    Wire crimpers
    Screwdriver or nut-driver
    Panel removal tool
    Electrical tape

    Safety Alert: As a standard safety precaution, always disconnect your vehicle's negative batter cable before you begin any electrical or mechanical work on your vehicle.

    advertisement


    PHOTO

    Figure A
    PHOTO

    Figure B
     PDF
    Installing an MP3/CD Player

    This upgrade can reduce driver distraction since, with MP3 format, several hours of music can be stored on a single compact disc. Since changing discs while driving can take your attention from the road, this technology can help reduce distraction while driving. With simple-to-use software that's available over the internet, you may able to fit up to 12 hours of music onto a single CD-R disc. (You'll need a computer with a CD burner to create your own MP3 discs.)

    Wiring Harness

    • A "pigtail" adapter harness (figure A), that allows you to keep the factory wiring harness intact, will come with your new CD player. (You'll need to be sure that you have the appropriate harness to fit your vehicle.) Before you start installing the unit, you can combine the factory harness and adapter so that the deck installation is essentially "plug and play."

    • Consult the manufacturer's instructions or manuals to match the colored wires according to their functions. To make this process less confusing, you can make a simple table or chart (figure B) that shows the colors of wires on each side.

      You can download a simple chart in .pdf format -- like the one seen in this episode -- by clicking the highlighted text under FIGURE B at right.


    • Once you've established how the wires correspond, connect the appropriate wires using a crimp-on connector and crimping tool (figure C).

    • Once the wires are connected give them a gentle tug to make sure the connections are secure (figure D).

    • Wrap each of the connections with electrical tape.
      Photo

      Figure C

      Photo

      Figure D


      PHOTO

      Figure E

    In-Dash Installation

    The stereo we installed in this demonstration is an industry-standard size called DIN, measuring two inches tall by seven inches wide. However, the GM vehicle in our demonstration had a factory stereo that was larger in size (figure E).

    Therefore our installation required that we use an adapter bracket (figure F). Once the bracket is installed in the opening, the new stereo simply slides into place in the bracket opening and is secured with a trim plate (figure G). Slide the MP3 Player into the adapter and, using a small screwdriver, bend up the metal tabs to secure the bracket.
    Photo

    Figure F

    Photo

    Figure G


    PHOTO

    Figure H
    PHOTO

    Figure I

    • Be sure to disconnect the vehicle's negative battery cable before you begin this job. This will protect you from electrical shock and prevent damage to the car that could occur in the event of an electrical short.

    • Remove the trim panel that surrounds the factory stereo. Consult your vehicle's owner manual for the procedure. A trim-panel tool and screwdriver may be required. Use caution as you remove the panel. You may have to disconnect any lights or switches attached to it.

    • Set the trim panel aside and remove the screws that hold the factory stereo in place. In our case, this required a nut-driver (figure H).

    • With the screws removed, you should be able to slide the factory stereo forward and out.

    • Disconnect the antenna wire at the back of the unit.

    • Disconnect the factory wiring harness at the back of the unit (figure I).


    • Plug in the new harness into the factory harness on the car (figure J).

    • Plug the other end of the new harness into the back of the unit (figure K).
      Photo

      Figure J

      Photo

      Figure K



    • Plug in the antenna (figure L).

    • With the adapter harness, the new wiring may be a little bulky. Carefully feed the wiring into the opening, using caution not to tangle or crimp anything, and slide the new stereo (in the adapter bracket) into the opening (figure M).
      Photo

      Figure L

      Photo

      Figure M


      PHOTO

      Figure N

    • Before reassembly, reconnect the battery and test everything out.

    • Replace the screws in the bracket.

    • Reattach the wires for any lights or switches that you removed on the trim panel.

    • Replace the trim panel (figure N).

      Note: This is a summary of steps and tips shown in this episode of Auto Primer. These are general guidelines and applicable to most contemporary vehicles. There may be variations in procedures depending on vehicle manufacturer, model, age or condition of vehicle and in the applicable parts, products or kit. Always follow proper safety precautions, and read and follow manufacturer's guidelines, diagrams and safety notices that come with any replacement parts or product that you select. Also, familiarize yourself with your owner's manual before doing any work on your vehicle.

      Safety Alert: Always dispose of automotive fluids and other hazardous materials responsibly. Many auto centers have auto-fluid recycling centers.


      RESOURCES :

      The Complete Idiot's Guide to Trouble-Free Car Care
      Author: Dan Ramsey
      ISBN: 0028635833
      Alpha Books


      Ultimate Auto Detailing
      Model: 0879389419
      Author: David H. Jacobs
      (1995)
      To order this title from Amazon.com, click here.
      Motorbooks International


      Auto Detailing: Step-By-Step Procedures for Complete Automobile Detailing
      Model: 0801983940
      Author: James Joseph
      (1998)
      To order this title from Amazon.com, click here.
      Chilton Book Company
      Westchester, PA 19380
      Phone: 610-738-9280
      Fax: 610-738-9354

      Auto Repair for Dummies
      Author: Deanna Sclar
      ISBN: 0764550896

      Auto Audio
      Model: 0071346899
      Author: Andrew Yoder
      Publisher: Tab Books
      Order this title from Amazon.com.

      How Cars Work
      Author: Tom Newton
      ISBN: 0966862309
      Publisher: Black Apple Press
      To order this title from Amazon, click here.

      What's Wrong With My Car?: A Quick and Easy Guide to Most Common Symptoms of Car Trouble
      Author: Bob Cerullo
      ISBN: 0452269938
      Publisher: Plume (1993)
      To order this book from Amazon.com, click here.

    • ALSO IN THIS EPISODE: