Use reclaimed building materials to fashion a custom king-sized bed with vintage-style headboard.
By Dylan EastmanMore in Blog Cabin
Cut four 77" x 10" cross boards from the 3/4" plywood and attach them across the frame with the face flush with the drawer openings on each side. Cut 24' of 1 1/2" ledger out of 3/4" plywood and attach with wood glue and finish nails 8 inches on center around the inside perimeter of the frame. The top of the ledger should be flush with the top of the cross boards. Next, trim the top of the 3/4" frame with bed mold or similar.
We sent a note to our support staff about the glitch you just experienced. Please click the button below to reload your content.
A Sharp Edge (02:31)
How to Install a Paver Patio (04:54)
Eight-Level Backyard Deck (00:02:13)
Pergola Installed From Kit (00:02:10)
Martini Bar Basement (20:01)
Gabion Garden Entertainment (20:00)
Build an Outdoor Fireplace (02:48)
Fireplace Upgrade (02:16)
Enhance Your Walkway (00:01:04)
Range Hood Installation (02:51)
Nature's Garden Helpers 10 Photos
Plants That Bloom in Summer 35 Photos
Homemade Pet Treats and Recipes 5 Photos
13 Mowing Tips for a Healthy Lawn 13 Photos
How to Install Doorway Molding 8 Photos
Under-Cabinet Lighting Choices 4 Photos
7 Budget Backsplash Projects 7 Photos
© 2014 Scripps Networks, LLC. All Rights Reserved.